Sunday, December 4, 2016

Tanks for the ride

So the plumber came to plumb in our new tank, on the first day predicted for a heatwave. Friday. Fortunately, we registered 2 degrees less, than the maximum temperature of 40 degrees Celsius. But STILL, a very hot day to be working all day in the sun.

I was sure to check on him a few times, in the six hours he took to finish the job. Just to make sure he hadn't passed out. I also offered cool drinks if required. But he came prepared. I still had to ask though.


Trench for the underground pipe


The last job we had to get done, before he arrived, was to dig the trench for the return line, up to our existing tank, and pump. He explained, both tanks would be drawn from, at the same time. Which was meant to be better for the tanks, than emptying one at a time. The plastic walls should have less chance of sagging inwards, as the water levels in both tanks, drop together.


Temporary solutions


As we were waiting days for the plumber, with trenches in the ground, we had to prepare for the possibility of rain. Which we DID receive. More about that soon. So we had to install a temporary hose in the overflow pipe of the old tank. Which is the black plastic you see.

Next to it, is a couple of old 2x4's used as a temporary bridge. It was much safer crossing a sturdy surface, than stepping over a large gap in sometimes soft, terrain. But what about that rain we received?


Outlet brass fitting


It was quite a big storm, and the trenches filled. The above picture was taken before the storm. It was on the day the tank was lowered into it's final resting place. Can you see where this is going? Trenches, water flowing and an open hole into the tank, at trench level.

I bet you can guess we had some soil deposited near the brass outlet? It didn't enter the tank, thankfully. It spilled onto the blue crusher dust though. I bet you couldn't guess that somehow, a thin veneer of water in the hole, was able to shift an empty, 450kg tank? Well, I certainly didn't believe it when I first saw it. The brass outlet fitting, that was facing centre of the trench (above) shifted, to face the edge of the trench instead.


Temporary protection


I was too busy trying to fix it the next day, to get photographs, but this is what it looked like afterwards. I had to reposition the trench (as seen by the darker soil) so the brass fitting, was centre of the trench again. And as we had several more days to wait for the plumber, with more rain predicted, I rigged up a piece of board and log, to seal the brass fitting. It would also stop any water and silt, caught in the trench, draining into the hole the tank was sitting in.

We did get another rain event, but it wasn't as much as the first. So not a lot of silt travelled, and thankfully, the empty tank didn't move again.


Trench to pump


Back to the trenches though. Once our long trench passed the two tanks, and went up the hill, we curved it around to the pump. Our reliable Onga pump, has been going since 2007. It had a small repair early in the piece, but was covered under warranty. It has been running faithfully ever since.

You can see the bricks we had to install, under the pump, after our first big rain event. There's a reason for that. A lot of water escaped the tank through the inspection hole, just above the pump. It subsequently washed the soil out, and left the pump hanging only by it's copper pipe. Having a plinth of bricks go under ground, would help prevent this, should the soil wash away again.

Here is a picture of how it happened.


 December 2007


The roof of the tank is not meant to be that round! This was a result of dodgy plumbers, hired by our building company. There are two very specific reasons this happened, and could have been prevented. Firstly, there were two pipes going into the tank (from the roof of our house) and only one pipe to allow excess water, to escape a full tank.

In other words, too much going in and not enough pipe to let the excess water out. The pressure mounted and the water naturally burst through, where it could.


Outlet pipes connecting tanks


Our new plumber helped to solve this problem, by installing two pipes into the new tank, subsequently matching the amount of water entering from the roof. The plumber also installed an expansion joint in the overflow pipes. So as the new tank settles, it has a little leeway to move without affecting the pipes.

The second reason our old rainwater tank, risked bursting at the seams in big rain events, was the kind of overflow fitting, the plumbers used on the outlet pipe. This outlet pipe is designed to allow excess water to escape a full tank. Dodgy plumbers & Co, installed a fixed outlet pipe. Meaning, we couldn't remove the wire mesh, to prevent mosquitoes accessing the tank.


 Picture taken, June 2016
we previously rigged a temporary pipe to take water away 
from the base of the old tank


Why would we want to remove the mesh preventing mosquitoes access? So all those plastic shavings inside the tank, as a result of the plumbers drilling holes into it, could escape.

All those filings were blocking the outlet pipe from draining at full speed. Cheap and nasty plumbing solutions. There should have been a removable mesh cap on the overflow pipe.


 New inspection joint


Needless to say, when our new plumber provided a different solution, when he came to quote, he got the job straight away. He was going to install a little device in the overflow pipe, which would allow us to clean the outlet pipe, of all the plastic filings he'd put into the tank. Makes perfect sense, doesn't it?

In the outlet pipe, there are removable mesh caps, above and below. They are easy to remove and more importantly, ensure that any overflow water, once both tanks are full, won't be blocked by plastic shavings. It's our job to remove the wire mesh, and clear it - especially the first time it overflows.


We still need to backfill at rear


Look what a professional job he did though. Not only is the overflow pipe going underground, and won't be released some 3 meters away from the base of the tank, but he also provided a plastic black box, for the tap and valve to be housed safely.


 Access box to main valve


The pipe coming out of the tank, has a return valve, so the tank should never run dry and put air bubbles into the pump. When that happens, you have to re-prime the pump again. Which our friendly plumber showed me how to do, even though it was 38 degrees Celsius and he installed a return valve, so I shouldn't have that problem anyway.

He installed the return valve as a precaution, as he wasn't going to assume the plumbers who installed the first tank, installed a return valve. The first tank was partly buried, and from what pipes he had to access underground, he couldn't see a return valve. They could have put it lower down, but from where he had to access, he couldn't see it.

Technically, they should have installed a return valve, but he was rightly protecting his own workmanship, by ensuring any additions he plumbed in, wouldn't run into that problem, if the former plumbers didn't do their job properly. Which is really a sign of a professional, who takes their own workmanship seriously.


Water outlet, released down hill


Another feature, which won him the job with us, was taking the overflow water away from the base of the tank. Three metres away (all underground), and he even installed a grate so nothing could get in. The soil you can see on the grate box, was from the last storm. It came the very next day, and even though the plumber had installed everything the day before - he didn't have a spare grate in his truck.

He promised to pop around, the next day (a Saturday) on his way to a family gathering, to glue it on for us. He literally beat the storm, only by a few minutes.

I was really impressed with his workmanship, and ability to explain every step of the process. The fact we were doing the earthworks, ensured he had to explain various features, so we could implement the correct work. However, he made sure we understood all the pieces we weren't involved with either. If you're a local, then I can't recommend Ken Ball Plumbing, highly enough.


Backfilling crusher dust


One last job for us to do now, is finish backfilling the tank with crusher dust. And of course, because we love to garden, some new plants around the tanks. There will be rhyme and reasons for our selections of plants, which I look forward to sharing another time.

While the recent storm we received, wasn't able to fill both tanks, it did give us extra water to shift to the emptier tank. We were advised the tank should be at least a third full, before commencing backfilling. This ensures it won't be moved by any pressure we exert against it, dumping more crusher dust.

So, yay! Most of the incredibly hard yards and uncertainty about the second tank, have been settled. If you're interested in the numbers, here's the breakdown:

  • Tank on sale, including delivery  - $2,450
  • Plumber (labour, parts, travel)    - $1,560
  • Crusher dust (supply, delivery)    - $   300
  • Compactor hire (half a day)        - $     65
                                                   Total - $4,375

Which works out at 81 cents per gallon, or 21 cents per litre.


Before there were trenches, there was a hole to dig


Doing the earthworks ourselves, using only manual tools, saved us from $1,000 and possibly more. In fact, we were pleasantly surprised by the plumbers comments, after he installed the overflow pipes, between both tanks. He used his spirit level and said they were spot on, level. Coming from a professional, that meant a lot to us. We did our best to get them even, and spent extra time making it so, but to hear that confirmation, unprompted, was reassuring.

Perhaps we're not just a couple of crazy people, who like to suffer unusual punishment, digging relentlessly for months! Maybe it gives us a sense of satisfaction, after all the money gets exchanged, that we weren't just consumers shafted to the sidelines of our purchase. We've been honing skills, ever so gradually, over the years, and we hope to put them to good use in other projects in future too.

But for now...rest and gratitude.



10 comments:

  1. How great to find such a good plumber, Chris. I can tell you are very impressed. We are surviving the heat up here on the hill and it is very breezy at the moment as there are storms around. Only a few more days to go before we are back to normal temps.

    ReplyDelete
    Replies
    1. You guys are lucky on the hill, to get those cool breezes. Although the weather predictions have changed a little since checking this morning. Instead of the 40+ temps, over the next few days, they're in the upper 30's instead.

      I'll take a few degrees cooler, any day. Except maybe in the middle of winter, lol.

      Delete
  2. Wow! How relieved you must be! I didn't realise there was so much involved in bits and pieces, valves and suchlike. Our 9000 litre tank beside the house isn't plumbed into the house as we have town water. It was to be for garden watering only (although I do drink it.) Later on, we bought 2 4500 litre tanks which are free-standing on the top of the slope beside the house and they're not even plumbed into the spouting. I used to pump up water into them from the main tank (we got a free pump with it), but I don't even do that now. I fill these 2 with mains water (there's a tap nearby) and then I can use that to water by gravity with a fine spray which puts water into the soil more slowly. If I stand there using mains water and a hose the soil is so compacted the water runs off in no time. These 2 small tanks are connected at the base so they fill evenly, so it was interesting, that bit about drawing water from both tanks at the same time. I may eventually get them connected to the roof, although the only one nearby is the carport roof and only half of it would be suitable.

    There are trees nearby (roots!) and the digging, cost and disruption are putting me off ever doing anything.

    Awesome, that photo of the water spraying out of the original tank. Bad plumbing job for sure!

    ReplyDelete
    Replies
    1. If you're worried about tree roots, I've seen people use the same flexible plastic pipe as ours, that went underground - only used on the surface. So long as you don't have cars driving over it or risk people tripping, the pipes should last a long time on the surface.

      I had put off speaking to a plumber forever, and it wasn't until I saw a tank just like ours on sale, that I decided to finally commit to that second tank. Speaking to a professional, made it make sense, how it could all be done. We happened to go with the guy who quoted us, but you don't have to commit to a professional trades person. You could just ask them what they would do, and see if it will be a simple fix, or as complicated as you fear.

      When I took that photo of the nearly exploding tank, I was shaking like jelly. I'm surprised it wasn't more blurry, lol. ;)

      Delete
  3. Good workmen are worth their weight in gold. You and hubby did so well in getting the tank area cleared and level, My back and shoulders are aching thinking about what you had to do. Now all we need is some decent rainfall to get the tanks flushed and full.

    ReplyDelete
    Replies
    1. Yes, a good tradie, like a good Doctor, will always be hard to book, lol. They're predicting rain, but we haven't seen much yet.

      Delete
  4. Plumber No. 2 is a gem! It's so hard to find people like that nowadays. We've had very few workers do a proper job for what we've hired them to do.

    Dan and I would do as much of the gruntwork ourselves as possible, too. It makes economic sense, but also there's a feeling of being hands-on involved in the project. I know this is a big one to check off your to-do lists.

    ReplyDelete
    Replies
    1. I suspect if we lived more rural, we'd have a problem finding reliable trades people too. As we live on the edge of a developing city though, we have a pick of good trades people, who will travel out to us for a small fee.

      You and Dan do a great job, fixing and developing the infrastructure on your land. It is satisfying knowing we are capable of doing so much, and learning more in the process.

      Delete
  5. I learnt so much from this post Chris. For instance I didn't know you would be able to draw from both tanks at the same time.

    ReplyDelete
    Replies
    1. Apparently there's only one main line to the house from our pump, and he just attached the new line into that. I'm glad he took the time to explain it. I found it very informative too.

      Delete

Thank you for taking the time to comment. I love reading what you have to share. Gully Grove is a Spam free environment though, so new commenter’s only leaving hyperlinks, will be promptly composted.